Agro Asian Industries

·        Capacity –4 TPH (Based on wheat at 12% moisture and 10% impurities)

·        02 electric motor  of 4 H.P. each (Crompton/ABB/Kirloskar or any standard make)

·        Length of cylinder 9” feet (approx).

·        Precise rotation speed control mechanism.

·        Toolkit and other standard features.     

·        Bearing made:  NTN/SKF/NRB/NBC or standard make.

·        Channel : Tata Steel,  5 inch

·        Shaft: 51 mm, drawn shaft. All shafts are made of EN-8 & are mounted on pillow/flange type self aligned high quality ball bearings with built in casing.

·        02 electric motor  of 4 H.P. each (Crompton/ABB/Kirloskar or any standard make)

·        Length of cylinder 6” feet each (approx).

·        Precise rotation speed control mechanism.

·        Toolkit and other standard features.

·        Bearing made:  NTN/SKF/NRB/NBC or standard make.

·        Channel : Tata Steel,  4 inch

·        Capacity –3 TPH (Based on wheat at 12% moisture and 10% impurities)

·        02 electric motor of 4 H.P.  (Crompton/Havel’s/Kirloskar or any standard make)

·        Length of cylinder 10” feet. (approx)

·        Precise rotation speed control mechanism.

·        Tool kit and other standard features.             

Indent Cylinder are used to remove the cut grains and barley.

Complete with following features:

·        Capacity – 1 TPH (Based on wheat at 12% moisture and 10% impurities)

·        02 electric motor  of 4 H.P. each (Crompton/Havel’s/Kirloskar or any standard make)

·        Length of cylinder 12” feet. (approx)

·        Precise rotation speed control mechanism.

·        Toolkit and other standard features.             

·        Bearing made:  NTN/SKF/NRB or standard make.

·        Channel : Tata Steel,  5 inch

·        Shaft: 51 mm, drawn shaft. All shafts are made of EN-8 & are mounted on pillow/flange type self aligned high quality ball bearings with built in casing.

Indent Cylinder are used to remove the cut grains or barley
Complete with following features:

·        Capacity – 1 TPH (Based on wheat at 12% moisture and 10% impurities)

·        02 electric motor  of 4 H.P. each (Crompton/Havel’s/Kirloskar or any standard make)

·        Length of cylinder 12” feet. (approx)

·        Precise rotation speed control mechanism.

·        Toolkit and other standard features.             

·        Bearing made:  NTN/SKF/NRB or standard make.

·        Channel : Tata Steel,  5 inch

·        Shaft: 51 mm, drawn shaft. All shafts are made of EN-8 & are mounted on pillow/flange type self aligned high quality ball bearings with built in casing.

Complete with following features:

·        Capacity – 2 TPH (Based on wheat at 12% moisture and 10% impurities)

·        01` electric motor  of 2 HP (Crompton/Havel’s/Kirloskar or any standard make)

·        Length of cylinder 12” feet. (approx)

·        Precise rotation speed control mechanism.

·        Tool kit and other standard features.             

·        Bearing made:  NTN/SKF/NRB/NRC or standard make.

·        Channel : Tata Steel,  5 inch

·        Shaft: 51 mm, drawn shaft. All shafts are made of EN-8 & are mounted on pillow/flange type self aligned high quality ball bearings with built in casing.

·        Electric Load 2 H.P. (Crompton/ABB/Kirloskar or any standard make)

·        Length of cylinder 4” feet each (approx).

·        Precise rotation speed control mechanism.

·        Toolkit and other standard features.

·        Bearing made:  NTN/SKF/NRB/NBC or standard make.

·        Channel : Tata Steel,  4 inch

·        Capacity – 6 TPH (Based on wheat at 12% moisture and 10% impurities)

·        02 electric motor  of 4 H.P. each (Crompton/ABB/Kirloskar or any standard make)

·        Length of cylinder 12” feet each (approx).

·        Precise rotation speed control mechanism.

·        Electric Load 4 H.P. (Crompton/ABB/Kirloskar or any standard make)

·        Length of cylinder 12” feet each (approx).

·        Precise rotation speed control mechanism.

·        Toolkit and other standard features.    

·        Length of cylinder 4” feet each (approx).

·        Precise rotation speed control mechanism.

·        Toolkit and other standard features.    

·        Bearing made:  NTN/SKF/NRB or standard make.

·        Channel : Tata Steel,  4 inch

·        Capacity – 2 TPH (Based on wheat at 12% moisture and 10% impurities)

·        Electric Load 2 H.P. (Crompton/ABB/Kirloskar or any standard make)

·        Length of cylinder 4” feet each (approx).

·        Precise rotation speed control mechanism.

Used for additional separation or up gradation of seeds, grain of various crops on length basis after size and sieve cleaning. Also used for removing weed seeds, broken or cut, round grains, material longer than the desired crop seed.
The indented cylinder is constructed to be part of a modular system, this means that a quantity of indented cylinder can be so arranged to satisfy all demands to capacities and plant layout.

·        Electric load 4 H.P. (Crompton/Havel’s/Kirloskar or any standard make)

·        Length of cylinder 12” feet (approx).

·        Precise rotation speed control mechanism.

·        Toolkit and other standard features.     

Complete with following features:

·        Capacity –5 TPH (Based on wheat at 12% moisture and 10% impurities)

·        Electric Load 2 H.P. (Crompton/ABB/Kirloskar or any standard make)

·        Length of cylinder 12” feet (approx).

·        Precise rotation speed control mechanism.

·        Toolkit and other standard features.    

·        Bearing made:  NTN/SKF/NRB/NBC or standard make.

·        Channel : Tata Steel,  4 inch

·        Shaft: 45 mm, drawn shaft. All shafts are made of EN-8 & are mounted on pillow/flange type self aligned high quality ball bearings with built in casing.

Indent Cylinder are used to remove the cut grains and barley.

Complete with following features:

·        Capacity – 1 TPH (Based on wheat at 12% moisture and 10% impurities)

·        02 electric motor  of 4 H.P. each (Crompton/Havel’s/Kirloskar or any standard make)

·        Length of cylinder 12” feet. (approx)

·        Electric Load 1.5 H.P. (Crompton/ABB/Kirloskar or any standard make)

·        Length of cylinder 4” feet each (approx).

·        Precise rotation speed control mechanism.

·        Toolkit and other standard features.    

·         Capacity –4 TPH (Based on wheat at 12% moisture and 10% impurities)

·         Electric load 4 H.P. (Crompton/Havel’s/Kirloskar or any standard make)

·        Length of cylinder 12” feet (approx).

·        01` electric motor  of 2 HP (Crompton/Havel’s/Kirloskar or any standard make)

·        Length of cylinder 12” feet. (approx)

·        Precise rotation speed control mechanism.

·        Tool kit and other standard features.             

Complete with following features:

·        Capacity – 2 TPH (Based on wheat at 12% moisture and 10% impurities)

·        02 electric motor  of 4 H.P. (Crompton/Havel’s /Kirloskar or any standard make)

·        Length of cylinder 8 feet (approx)

·        Precise rotation speed control mechanism.

·        Tool kit and other standard features.   

·        Bearing made :  NTN/SKF/NRB

·        Casing Gauge: 16 Gauge

·        Boot Section Gauge- 10-12 Gauge